kingnovel Chapter 357: Four Secretaries, Countdown to Car Mass Production
Chapter 357: Four Secretaries, Countdown to Car Mass Production
On March 3, Hao Qiang interviewed secretary candidates.
He has very strict requirements for secretaries. They must be fluent in English, have solid writing skills, good written and expressive abilities, have a good image, good character, and solid professional knowledge.
The dozen or so candidates who were finally interviewed had at least a bachelor's degree from 985 universities.
It was not until the interview stage that the candidate found out that it was Hao Qiang who needed a secretary.
After two hours of in-depth interviews, Hao Qiang finally finalized the candidates for the secretarial team.
Secretariat Minister Pan Lewei, 28, holds a Ph.D. in Business Administration from Imperial Capital University.
After graduation, I joined Future Technology Group. Although I only had one year of work experience, I performed outstandingly.
Every weekday, he would briefly report the day's work priorities to Hao Qiang on his way to work.
Considering that Hao Qiang's residence is only a dozen minutes' drive from the company, Pan Lewei must complete the report in just a few minutes.
In addition, he is also responsible for coordinating the work of the other three secretaries, and when necessary, he has to accompany Hao Qiang to social events.
Legal secretary Yang Mei, 27 years old, graduated from Huaguo University of Political Science and Law with a master's degree in law and has two years of experience working in a law firm.
She specializes in economic law, including securities, intellectual property, finance and real estate.
Although he is not an expert in every field, he can provide Hao Qiang with timely legal advice.
In addition to legal matters, she is also responsible for conducting on-site visits to subsidiaries.
As the number of the group's subsidiaries and Hao Qiang's personal shareholding companies increased, she became Hao Qiang's "eyes", conducting secret supervision on his behalf.
Administrative Secretary Chen Long, 25 years old, holds a bachelor's degree in computer science from South China University of Technology.
He is mainly responsible for searching and organizing professional information, providing information support and learning materials for Hao Qiang's decision-making.
Administrative secretary Sun Shasha, 23 years old, holds a bachelor's degree in Chinese language and literature from Yuecheng University.
She is responsible for taking meeting minutes, drafting the chairman's speech, and collecting and analyzing key media coverage.
These four secretaries are not only well-mannered in appearance, but also highly qualified and have excellent communication skills.
Hao Qiang provided them with generous salary packages, among which Pan Lewei's salary was comparable to that of middle-level managers.
If he performs well, he may be entrusted with important tasks in the future and become a senior executive of a subsidiary.
Other secretaries are also expected to be transferred to other management positions.
It can be said that the secretarial team is an important reserve force for the company's future cadres.
The four-person office is right across from the chairman's office, making it convenient for communication at any time.
A few days later, four secretaries arrived at their posts one after another, and Hao Qiang suddenly felt that his work efficiency had greatly improved.
Whether he is inspecting workshops or laboratories, or going out on official business, he is always accompanied by a capable assistant.
With someone to share the daily chores with, Hao Qiang was able to devote more time and energy to thinking about the company's development strategy.
It can be said that this capable secretarial team not only reduced Hao Qiang's workload, but also injected new vitality into the company's efficient operation.
Recently, Hao Qiang has focused all his energy on automobile vibration reduction optimization and automobile mass production.
3 month 5 day,
Hao Qiang came to the Pengcheng factory to inspect the progress of equipment installation in the automobile factory.
Equipment installation began at the end of last month and is currently progressing slowly.
Pan Lewei had just started his job and was not familiar with automobile production. He studied the relevant knowledge intensively at night and was under a lot of pressure as he had to at least understand some basic knowledge.
The factory's supporting dormitories are still under renovation and have not yet been put into use.
To solve the accommodation problem for employees, the group rented a house nearby.
The employees currently stationed here are mainly responsible for assisting with the installation, commissioning and acceptance of equipment.
Pengcheng Industrial Park covers a vast area and is magnificent.
The main entrance of the park is located on the south side, while the office buildings and dormitory areas are nestled on the west side, close to the blue coastline.
This layout takes work efficiency into consideration while creating a pleasant living environment for employees.
Hao Qiang asked A Kun to stop the car and get out to take a look.
He came here once years ago.
Now that spring has arrived, new buds are sprouting, and vitality is everywhere, which is a little different from before the New Year.
It was Pan Lewei’s first time here. Before he even entered the factory, he was shocked by the exterior and the factory gate.
The area outside the wall is a green belt about twenty meters wide, and outside of that is the highway.
The brick wall part of the wall is about 2 meters high, and a protective net is installed on the top of the wall.
The gate has an entrance and exit, and is four lanes wide in one direction.
Through the gate, there is a straight road, more than 30 meters wide, which makes it very convenient for trailer trucks to turn around.
At the gate there is a three-story reception room covering an area of several hundred square meters.
"After the company is officially put into use, outsiders are not allowed to enter the work area without permission, especially some core laboratories. Therefore, a reception room will be built at the gate." Hao Qiang reminded.
"Yeah, I see." Pan Lewei replied respectfully with a smile, "Chairman, this area is so large, there must be more than one gate."
"Yes, the main gate is this way, and there are gates in other directions."
After taking a quick look, the two got back into the car.
Hao Qiang asked A Kun to drive directly onto the avenue.
After entering the gate, the office area and employee living area are at 7 or 8 o'clock on the left, and the automobile factory area is from 9 to 12 o'clock.
The automobile factory is adjacent to the company's deep-water wharf and has tracks to facilitate the transportation of automobiles and raw materials.
This pier is only 500 meters long and is a medium-sized deep-water pier with an investment cost of 20 billion yuan, including port machinery equipment and a special automobile pier.
The investment is not small, but this will be the industrial park of Future Technology Group, and the area will continue to expand in the future.
Having our own dock makes transporting large equipment very convenient and efficient.
At present, the terminal has been put into use.
If nearby factories want to use the dock, they will have to pay a fee.
After a while, the Rolls-Royce Phantom drove into the car factory area.
The Future Technology Group’s industrial park is large, and each subsidiary’s factory area is independent.
In the future, the factory will be more spacious, and it will be better for employees to ride bicycles to work.
Hao Qiang first came to the automobile welding workshop.
Automobile welding includes resistance welding, which is mainly used to weld lap welds below 1.5 mm.
The resistance welding robot used is from the island country FANUC company, and the 6-axis load is more than 120 kilograms.
The laser welding and arc welding robots are also from FANUC.
FANUC is widely used in the automotive industry and provides comprehensive welding solutions.
Hao Qiang doesn't like Japanese people and doesn't want to use things from Japanese countries, but he has to admit that this brand of welding robot is the most suitable. The reality is helpless.
In terms of welding robots, it is better than KUKA and ABB.
KUKA robots are used for handling and polishing robots.
When Hao Qiang arrived, the site was busy installing equipment.
Several islanders and the company's engineers are coordinating and cooperating.
When Hao Qiang arrived, they took a look at him, greeted him from a distance, and continued to work.
Of course, he negotiated with the islanders for a welding production line and did not adopt a fully equipped production line.
Fixtures and auxiliary tools are all developed by Future Technology Group.
All Future Technology Group wants is the bare metal welding robot and external axes from FANUC.
Of course, if production cannot be achieved, they will not be responsible and will only be responsible for the welding robot part.
The island country does not sell the most advanced production lines, and Hao Qiang cannot accept the price.
“Will you sell it to me? If not, I will buy a welding robot from another brand!
Don’t tell me I have to buy a complete welding line, or even a complete production line.”
At that time, Hao Qiang said this to the Japanese people.
He understands technology and will never listen to the nonsense of the Japanese.
Industrial robots and automobile production lines are not that mysterious. They just require a large amount of equipment and high investment costs.
A medium-automated body-in-white welding line with an annual production capacity of 10 vehicles may require 150-250 welding robots.
The cost is mainly due to the investment in robots, welding machines and external axes, which is estimated to account for 80%.
The bare metal cost of a FANUC arc welding robot with 6 axes and a load capacity of 6 kg is about 17 yuan.
It is equipped with a Panasonic 500a welding machine, which costs about 35,000 yuan.
That is, the main equipment investment cost of an arc welding robot, including the base, is about 22 yuan.
Laser robot, the laser is much more expensive than the robot. One robot is equipped with one laser, and the main equipment costs about 40 yuan in total.
The resistance welding robot and the matching robot model are relatively large, and a welding machine and a robot cost about 30 yuan.
If there is an external shaft, a complete shaft set will cost at least tens of thousands of yuan.
Therefore, if there are 200 welding robots, the investment in equipment such as welding machines, robots, external axes, bases, etc. is about 6 million yuan.
Robots are relatively expensive now, but in a few years, an arc welding robot with a load of 6 kg may only cost 14 yuan.
Hao Qiang took a look around and found many problems. He pointed them out on the spot and asked the islanders to make corrections.
The islanders worked cautiously and agreed to make corrections after problems were pointed out.
However, they didn't expect that Hao Qiang was so knowledgeable. After just a casual walk around, he discovered many problems.
After patrolling the welding workshop, Hao Qiang then patrolled the stamping, painting, assembly, quality inspection, and vehicle debugging workshops.
On that day, Hao Qiang checked into Pengcheng and continued patrolling to find problems the next day.
If you don’t find problems in the early stages, it will be troublesome to correct them later.